Sargent & Greenleaf ® Combination Lock

How To Use S&G Combination Lock

CAUTION: On rare occasions a combination may shift during shipping. Follow these steps exactly so lockout won’t occur:

CAUTION: You have a safe that has a LEVER on the bottom of the door that needs to be pushed up to extend the bolts when the door is open.

 

  • If your safe has a key lock, unlock with key.
  • Turn dial to right until it stops.
  • Retract bolts by turning the handle clockwise to OPEN DOOR BEFORE TURNING DIAL.
  • Open the door 90 degrees, extend bolts to the locked position and try combination with the door open.
  • Try the combination three times with the door open to get familiar with the lock before closing.
  • DO NOT LOCK THE SAFE UNTIL YOU ARE SURE THE COMBINATION IS WORKING PROPERLY.
  • If it doesn’t, leave safe open and contact dealer.
    (Some models are not provided with key locks. Remove tape from dial, turn dial to the right until it stops. Follow above instruction.)

 

Copyright © 2015 Safe Guard Safe Co.  |  All rights reserved.